[FUGSPBR] Erro intermitente em wi0

[Eduardo Augusto Cosa]

PessoALL,
Instalei uma placa Orinoco da Lucent e tudo funcionou legal, mas é comum 
acontecer o seguinte erro ao inicializar a máquina: "wi_cmd: busy bit won't 
clear"

Acontencendo isso eu volto a desligar a máquina e volta ao normal.

Alguém tem idéia do que pode estar ocorrendo ???

Abaixo os logs do messages:

/kernel: wi0 at port 0x240-0x27f irq 3 slot 0 on pccard0
/kernel: wi0: 802.11 address: 00:02:2d:1e:8e:b6
kernel: wi0: using Lucent Technologies, WaveLAN/IEEE
/kernel: wi0: Lucent Firmware: Station 7.28.01
/kernel: wi0: timeout in wi_cmd 0x0002; event status 0x8080
/kernel: wi0: timeout in wi_cmd 0x0000; event status 0x8080
/kernel: wi0: wi_cmd: busy bit won't clear.
/kernel: wi0: wi_cmd: busy bit won't clear.
/kernel: wi0: init failed
/kernel: wi0: wi_cmd: busy bit won't clear.
last message repeated 21 times
/kernel: wi0: failed to allocate 1594 bytes on NIC
/kernel: wi0: tx buffer allocation failed
/kernel: wi0: wi_cmd: busy bit won't clear.
/kernel: wi0: failed to allocate 1594 bytes on NIC
/kernel: wi0: mgmt. buffer allocation failed
/kernel: wi0: timeout in wi_seek to 0/0; last status 4000
/kernel: wi0: timeout in wi_seek to 0/44; last status 4044
/kernel: wi0: wi_cmd: busy bit won't clear.
/kernel: wi0: xmit failed

Obrigado.
-- 
Eduardo Augusto Cosa

_______________________________________________________________
Sair da Lista: http://www2.fugspbr.org/mailman/listinfo/fugspbr
Historico: http://www4.fugspbr.org/lista/html/FUG-BR/