Re: [FUG-BR] Compilação do kernel

[Mario Sergio Candian]

PyTh3r,

tentei desta forma tambem e mesmo assim nao funcionou. Nem carregando o 
modulo na mao, nem via kernel. Nada funcionou. A musica toca por alguns 
segundos e comeca a "xiadeira" depois. :/

Atenciosamente,
Mario Sergio Candian
FreeBSD Brasil LTDA.
-
"Dreams as if you'll live forever. Live as if you'll die today" -- James Dean

On Tue, 30 Aug 2005, PyTh3r wrote:

> funciona traquilamente , faça isso:
> vi /boot/defaults/loader.conf
> e descomente mude de NO para YES a seguinte linha
> snd_via8233_load="NO"
> para
>
> snd_via8233_load="YES"
>
> Em 30/08/05, Mario Sergio Candian<mscandian em freebsdbrasil.com.br> escreveu:
>>
>> Boa tarde Pyth3r,
>>
>> sobre esta sua placa de som, voce conseguiu fazer ela funcionar sem
>> problemas no seu FreeBSD? Estou com uma placa como esta e aqui assim que
>> comeca a tocar uma musica (uns 10 segundos depois) ela para e comeca a
>> fazer "xiados". Ja tentei adicionando um patch no
>> /usr/src/sys/dev/sound/pcm/ e mesmo assim nao fluiu.
>>
>> root em cyberdine~% cat /dev/sndstat
>> FreeBSD Audio Driver (newpcm)
>> Installed devices:
>> pcm0: <VIA VT8235> at io 0xe000 irq 3 kld snd_via8233 (5p/1r/0v channels
>> duplex default)
>>
>> saida do pciconf -l:
>>
>> pcm0 em pci0:17:5: class=0x040100 card=0x16171849 chip=0x30591106 rev=0x50
>> hdr=0x00
>>
>> root em cyberdine~% sysctl hw.snd.verbose=3
>> hw.snd.verbose: 1 -> 3
>> root em cyberdine~% cat /dev/sndstat
>> FreeBSD Audio Driver (newpcm)
>> Installed devices:
>> pcm0: <VIA VT8235> at io 0xe000 irq 3 kld snd_via8233 (5p/1r/0v channels
>> duplex default)
>>          [pcm0:play:0]: spd 22050/48000, fmt 0x10000010, flags 0x00000000,
>> 0x00000010
>>          interrupts 0, underruns 0, ready 0
>>          {userland} -> feeder_root(0x10000010) -> feeder_rate(22050 -> 48000) ->
>> {hardware}
>>          [pcm0:play:1]: spd 0, fmt 0x00000000/0x00000008, flags 0x00000000,
>> 0x00000000
>>          interrupts 0, underruns 0, ready 0
>>          {userland} -> feeder_root(0x00000000) -> {hardware}
>>          [pcm0:play:2]: spd 0, fmt 0x00000000/0x00000008, flags 0x00000000,
>> 0x00000000
>>          interrupts 0, underruns 0, ready 0
>>          {userland} -> feeder_root(0x00000000) -> {hardware}
>>          [pcm0:play:3]: spd 0, fmt 0x00000000/0x00000008, flags 0x00000000,
>> 0x00000000
>>          interrupts 0, underruns 0, ready 0
>>          {userland} -> feeder_root(0x00000000) -> {hardware}
>>          [pcm0:play:4]: spd 0, fmt 0x00000000/0x00000008, flags 0x00000000,
>> 0x00000000
>>          interrupts 0, underruns 0, ready 0
>>          {userland} -> feeder_root(0x00000000) -> {hardware}
>>          [pcm0:record:0]: spd 22050, fmt 0x10000010, flags 0x00000000, 0x00000000
>>
>>          interrupts 0, overruns 0, hfree 4096, sfree 131072
>>          {hardware} -> feeder_root(0x10000010) -> {userland}
>>
>> Nao ha nenhum conflito de IRQ como pode ser visto abaixo:
>>
>> root em cyberdine~% dmesg | grep irq
>> vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xdc00-0xdcff mem
>> 0xdffffe00-0xdffffeff irq 11 at device 18.0 on pci0
>> fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6
>> drq 2 on acpi0
>> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> psm0: <PS/2 Mouse> irq 12 on atkbdc0 stray irq7
>> pcm0: <VIA VT8235> port 0xe000-0xe0ff irq 3 at device 17.5 on pci0
>>
>> O conteudo do patch que eu apliquei foi este:
>>
>> root em cyberdine/usr/src/sys/dev/sound/pcm% cat ac97.c.patch
>> --- ac97.c.orig Fri Jul  1 15:52:47 2005
>> +++ ac97.c      Fri Jul  1 15:52:51 2005
>> @@ -201,6 +201,7 @@
>>          { 0x54524e03, 0x07, 0, "TLV320AIC27",   0 },
>>          { 0x54584e20, 0x00, 0, "TLC320AD90",    0 },
>>          { 0x56494161, 0x00, 0, "VIA1612A",      0 },
>> +       { 0x56494170, 0x00, 0, "AD1888",        ad198x_patch },
>>          { 0x574d4c00, 0x00, 0, "WM9701A",       0 },
>>          { 0x574d4c03, 0x00, 0, "WM9703/4/7/8",  0 },
>>          { 0x574d4c04, 0x00, 0, "WM9704Q",       0 },
>>
>> Estou usando FreeBSD 5.4-STABLE.
>>
>> Qualquer dica eh bem-vinda! :)
>>
>> Atenciosamente,
>> Mario Sergio Candian
>> FreeBSD Brasil LTDA.
>> -
>> "Dreams as if you'll live forever. Live as if you'll die today" -- James Dean
>>
>> On Tue, 30 Aug 2005, PyTh3r wrote:
>>
>>> como adiciono esses moduloes ao meu kernel:
>>> placa de som: snd_via8233.ko   ( estou carregando ele manualmente com
>>> kldload /boot/kernel/snd_via8233.ko)
>>>
>>> placa de video: agp sis 305 ( que o modulo carrega por si só sis.ko )
>>>
>>> _______________________________________________
>>> Freebsd mailing list
>>> Freebsd em fug.com.br
>>> http://mail.fug.com.br/mailman/listinfo/freebsd_fug.com.br
>>>
>>>
>>>
>>
>> _______________________________________________
>> Freebsd mailing list
>> Freebsd em fug.com.br
>> http://mail.fug.com.br/mailman/listinfo/freebsd_fug.com.br
>>
>>
>>
>
> _______________________________________________
> Freebsd mailing list
> Freebsd em fug.com.br
> http://mail.fug.com.br/mailman/listinfo/freebsd_fug.com.br
>
>
>
-------------- Próxima Parte ----------
_______________________________________________
Freebsd mailing list
Freebsd em fug.com.br
http://mail.fug.com.br/mailman/listinfo/freebsd_fug.com.br