[FUG-BR] Re: mpd problemas
R. Filippus
filippus em gmail.com
Seg Jan 31 08:04:25 BRST 2005
Estou tentando conectar com um WinXP-Pro.
Nas propriedade da conexão selecionei "Criptografia opcional", com os
protocolos: CHAP, CHAP(MS CHAP) e Microsoft CHAP versão 2.
On Fri, 28 Jan 2005 17:56:35 -0200, R. Filippus <filippus em gmail.com> wrote:
> Boa tarde pessoal.
>
> Instalei o mpd-3.18_2 no FreeBSD 5.3-Stable, para servir como servidor
> VPN de estações Windows.
>
> Já tive diversos problemas, varios erros, pois fiz varias alterações
> nas confs do mpd.conf.
> Então estou iniciando tudo denovo e tentar debugar o problema com a
> possivel ajuda de vc´s.
>
> Abaixo segue os arquivos do mpd, e o log apos digitar mpd -k.
>
> # -------------------------
> # mpd.conf
> # -------------------------
>
> default:
> load pptp0 # Load the pptp session
> load pptp1
> pptp0:
> new -i ng0 pptp0 pptp0
> set iface disable on-demand
> set iface enable proxy-arp
> set bundle disable multilink
> set link yes acfcomp protocomp
> set link no pap chap
> set link enable chap
> set link keep-alive 60 180
> set ipcp yes vjcomp
> set ipcp ranges 192.168.250.1/32 192.168.250.5/30
> set ipcp dns 192.168.251.1
> set ipcp nbns 192.168.251.1
> set bundle enable compression
> set ccp yes mppc
> set ccp no mpp-e40
> set ccp yes mpp-e128
> set ccp yes mpp-stateless
> set bundle yes crypt-reqd
> #pptp1:
> new -i ng1 pptp1 pptp1
> set iface disable on-demand
> #set iface enable proxy-arp
> set bundle disable multilink
> set link yes acfcomp protocomp
> set link no pap chap
> set link enable chap
> set link keep-alive 60 180
> set ipcp yes vjcomp
> set ipcp ranges 192.168.250.1/32 192.168.250.9/30
> set ipcp dns 192.168.251.1
> set ipcp nbns 192.168.251.1
> set bundle enable compression
> set ccp yes mppc
> set ccp no mpp-e40
> set ccp yes mpp-e128
> set ccp yes mpp-stateless
> set bundle yes crypt-reqd
>
> # -------------------------
> # mpd.links
> # -------------------------
>
> pptp0:
> set link type pptp
> set pptp self 192.168.250.252
> set pptp enable incoming
> set pptp disable originate
> pptp1:
> set link type pptp
> set pptp self 192.168.250.252
> set pptp enable incoming
> set pptp disable originate
>
> # -------------------------
> # mpd.secret
> # -------------------------
>
> MyLogin MyPassword
> PeerLogin PeerPassword
> ConsoleLogin ConsolePassword
>
> teste "teste"
>
> # -------------------------
> # Abaixo segue o log.
> # -------------------------
>
> guaxinim# ps -ax | grep mpd
> 586 p0 R+ 0:00.00 grep mpd
> guaxinim# mpd -k
> Multi-link PPP for FreeBSD, by Archie L. Cobbs.
> Based on iij-ppp, by Toshiharu OHNO.
> mpd: pid 587, version 3.18 (root em guaxinim.magnus.com.br 15:41 27-Jan-2005)
> Usage: load system
> [pptp1] ppp node is "mpd587-pptp1"
> mpd: local IP address for PPTP is 192.168.250.252
> [pptp1] using interface ng1
> [pptp1] multilink option required for 4 links
> mpd: option "#CHAP" unknown
> mpd: option "authentication" unknown
> Usage: set ipcp ranges self/width peer/width
> [pptp1] #DNS: invalid IP address
> [pptp1] #NetBIOS: invalid IP address
> mpd: option "#Compression" unknown
> mpd: option "and" unknown
> [pptp1:device] mpd: PPTP connection from 192.168.250.253:2694
> pptp0: attached to connection with 192.168.250.253:2694
> [pptp1] IFACE: Open event
> [pptp1] IPCP: Open event
> [pptp1] IPCP: state change Initial --> Starting
> [pptp1] IPCP: LayerStart
> [pptp1] IPCP: Open event
> [pptp1] bundle: OPEN event in state CLOSED
> [pptp1] opening link "pptp1"...
> [pptp1] opening link "#Create"...
> [pptp1] opening link "netgraph"...
> [pptp1] opening link "device"...
> [pptp1] link: OPEN event
> [pptp1] LCP: Open event
> [pptp1] LCP: state change Initial --> Starting
> [pptp1] LCP: LayerStart
> [#Create] link: OPEN event
> [#Create] LCP: Open event
> [#Create] LCP: state change Initial --> Starting
> [#Create] LCP: LayerStart
> [netgraph] link: OPEN event
> [netgraph] LCP: Open event
> [netgraph] LCP: state change Initial --> Starting
> [netgraph] LCP: LayerStart
> [device] link: OPEN event
> [device] LCP: Open event
> [device] LCP: state change Initial --> Starting
> [device] LCP: LayerStart
> [pptp1] device: OPEN event in state DOWN
> [pptp1] attaching to peer's outgoing call
> [pptp1] device is now in state OPENING
> [#Create] device: OPEN event in state DOWN
> [#Create] this link has no type set
> [#Create] device is now in state DOWN
> [netgraph] device: OPEN event in state DOWN
> [netgraph] this link has no type set
> [netgraph] device is now in state DOWN
> [device] device: OPEN event in state DOWN
> [device] this link has no type set
> [device] device is now in state DOWN
> [pptp1] device: UP event in state OPENING
> [pptp1] device is now in state UP
> [pptp1] link: UP event
> [pptp1] link: origination is remote
> [pptp1] LCP: Up event
> [pptp1] LCP: state change Starting --> Req-Sent
> [pptp1] LCP: phase shift DEAD --> ESTABLISH
> [pptp1] LCP: SendConfigReq #1
> ACFCOMP
> PROTOCOMP
> MRU 1500
> MAGICNUM 9dd0e9ef
> MP MRRU 1600
> MP SHORTSEQ
> ENDPOINTDISC [802.1] 00 11 11 25 ad ac
> pptp0-0: ignoring SetLinkInfo
> [pptp1] LCP: rec'd Configure Request #0 link 0 (Req-Sent)
> MRU 1400
> MAGICNUM 272a74ed
> PROTOCOMP
> ACFCOMP
> CALLBACK
> Not supported
> [pptp1] LCP: SendConfigRej #0
> CALLBACK
> [pptp1] LCP: rec'd Configure Request #1 link 0 (Req-Sent)
> MRU 1400
> MAGICNUM 272a74ed
> PROTOCOMP
> ACFCOMP
> [pptp1] LCP: SendConfigAck #1
> MRU 1400
> MAGICNUM 272a74ed
> PROTOCOMP
> ACFCOMP
> [pptp1] LCP: state change Req-Sent --> Ack-Sent
> [pptp1] LCP: SendConfigReq #2
> ACFCOMP
> PROTOCOMP
> MRU 1500
> MAGICNUM 9dd0e9ef
> MP MRRU 1600
> MP SHORTSEQ
> ENDPOINTDISC [802.1] 00 11 11 25 ad ac
> [pptp1] LCP: rec'd Configure Reject #2 link 0 (Ack-Sent)
> MP MRRU 1600
> MP SHORTSEQ
> ENDPOINTDISC [802.1] 00 11 11 25 ad ac
> [pptp1] LCP: SendConfigReq #3
> ACFCOMP
> PROTOCOMP
> MRU 1500
> MAGICNUM 9dd0e9ef
> [pptp1] LCP: rec'd Configure Ack #3 link 0 (Ack-Sent)
> ACFCOMP
> PROTOCOMP
> MRU 1500
> MAGICNUM 9dd0e9ef
> [pptp1] LCP: state change Ack-Sent --> Opened
> [pptp1] LCP: phase shift ESTABLISH --> AUTHENTICATE
> [pptp1] LCP: auth: peer wants nothing, I want nothing
> [pptp1] LCP: authorization successful
> [pptp1] LCP: phase shift AUTHENTICATE --> NETWORK
> [pptp1] setting interface ng1 MTU to 1400 bytes
> [pptp1] up: 1 link, total bandwidth 64000 bps
> [pptp1] IPCP: Up event
> [pptp1] IPCP: state change Starting --> Req-Sent
> [pptp1] IPCP: SendConfigReq #1
> IPADDR 192.168.250.252
> COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
> [pptp1] CCP: Open event
> [pptp1] CCP: state change Initial --> Starting
> [pptp1] CCP: LayerStart
> [pptp1] CCP: Up event
> [pptp1] CCP: state change Starting --> Req-Sent
> [pptp1] CCP: SendConfigReq #1
> [pptp1] CCP: Checking whether 40 bits are enabled -> no
> [pptp1] CCP: Checking whether 56 bits are enabled -> no
> [pptp1] CCP: Checking whether 128 bits are enabled -> yes
> MPPC
> 0x01000040: MPPE, 128 bit, stateless
> [pptp1] ECP: Open event
> [pptp1] ECP: state change Initial --> Starting
> [pptp1] ECP: LayerStart
> [pptp1] ECP: Up event
> [pptp1] ECP: state change Starting --> Req-Sent
> [pptp1] ECP: SendConfigReq #1
> [pptp1] LCP: LayerUp
> [pptp1] LCP: rec'd Ident #2 link 0 (Opened)
> MESG: MSRASV5.10
> pptp0-0: ignoring SetLinkInfo
> [pptp1] LCP: rec'd Ident #3 link 0 (Opened)
> MESG: MSRAS-0-ADMIN03
> [pptp1] CCP: rec'd Configure Request #4 link 0 (Req-Sent)
> MPPC
> 0x01000001: MPPC
> [pptp1] CCP: Checking whether 40 bits are enabled -> no
> [pptp1] CCP: Checking whether 56 bits are enabled -> no
> [pptp1] CCP: Checking whether 128 bits are enabled -> yes
> [pptp1] CCP: SendConfigNak #4
> MPPC
> 0x01000040: MPPE, 128 bit, stateless
> [pptp1] IPCP: rec'd Configure Request #5 link 0 (Req-Sent)
> IPADDR 0.0.0.0
> no IP address available for peer!
> NAKing with 0.0.0.0
> PRIDNS 0.0.0.0
> NAKing with 192.168.251.1
> PRINBNS 0.0.0.0
> NAKing with 192.168.251.1
> SECDNS 0.0.0.0
> SECNBNS 0.0.0.0
> [pptp1] IPCP: SendConfigRej #5
> SECDNS 0.0.0.0
> SECNBNS 0.0.0.0
> [pptp1] IPCP: rec'd Configure Reject #1 link 0 (Req-Sent)
> COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
> [pptp1] IPCP: SendConfigReq #2
> IPADDR 192.168.250.252
> [pptp1] CCP: rec'd Configure Reject #1 link 0 (Req-Sent)
> MPPC
> [pptp1] CCP: SendConfigReq #2
> [pptp1] LCP: rec'd Protocol Reject #6 link 0 (Opened)
> [pptp1] LCP: protocol ECP was rejected
> [pptp1] ECP: protocol was rejected by peer
> [pptp1] IPCP: failed to negotiate required encryption
> [pptp1] IPCP: state change Req-Sent --> Stopped
> [pptp1] IPCP: LayerFinish
> [pptp1] ECP: state change Req-Sent --> Stopped
> [pptp1] ECP: LayerFinish
> [pptp1] bundle: CLOSE event in state OPENED
> [pptp1] closing link "pptp1"...
> [pptp1] closing link "#Create"...
> [pptp1] closing link "netgraph"...
> [pptp1] closing link "device"...
> [#Create] link: CLOSE event
> [#Create] LCP: Close event
> [#Create] LCP: state change Starting --> Initial
> [#Create] LCP: LayerFinish
> [netgraph] link: CLOSE event
> [netgraph] LCP: Close event
> [netgraph] LCP: state change Starting --> Initial
> [netgraph] LCP: LayerFinish
> [device] link: CLOSE event
> [device] LCP: Close event
> [device] LCP: state change Starting --> Initial
> [device] LCP: LayerFinish
> [pptp1] link: CLOSE event
> [pptp1] LCP: Close event
> [pptp1] LCP: state change Opened --> Closing
> [pptp1] LCP: phase shift NETWORK --> TERMINATE
> [pptp1] setting interface ng1 MTU to 1500 bytes
> [pptp1] up: 0 links, total bandwidth 9600 bps
> [pptp1] IPCP: Down event
> [pptp1] IPCP: state change Stopped --> Starting
> [pptp1] IPCP: LayerStart
> [pptp1] CCP: Down event
> [pptp1] CCP: state change Req-Sent --> Starting
> [pptp1] CCP: Close event
> [pptp1] CCP: state change Starting --> Initial
> [pptp1] CCP: LayerFinish
> [pptp1] ECP: Down event
> [pptp1] ECP: state change Stopped --> Starting
> [pptp1] ECP: LayerStart
> [pptp1] ECP: Close event
> [pptp1] ECP: state change Starting --> Initial
> [pptp1] ECP: LayerFinish
> [pptp1] closing link "pptp1"...
> [pptp1] LCP: SendTerminateReq #4
> [pptp1] LCP: LayerDown
> [pptp1] bundle: OPEN event in state CLOSED
> [pptp1] opening link "pptp1"...
> [pptp1] opening link "#Create"...
> [pptp1] opening link "netgraph"...
> [pptp1] opening link "device"...
> [pptp1] link: CLOSE event
> [pptp1] LCP: Close event
> [#Create] device: CLOSE event in state DOWN
> [#Create] this link has no type set
> [#Create] device is now in state DOWN
> [netgraph] device: CLOSE event in state DOWN
> [netgraph] this link has no type set
> [netgraph] device is now in state DOWN
> [device] device: CLOSE event in state DOWN
> [device] this link has no type set
> [device] device is now in state DOWN
> [#Create] link: OPEN event
> [#Create] LCP: Open event
> [#Create] LCP: state change Initial --> Starting
> [#Create] LCP: LayerStart
> [netgraph] link: OPEN event
> [netgraph] LCP: Open event
> [netgraph] LCP: state change Initial --> Starting
> [netgraph] LCP: LayerStart
> [device] link: OPEN event
> [device] LCP: Open event
> [device] LCP: state change Initial --> Starting
> [device] LCP: LayerStart
> [pptp1] link: OPEN event
> [pptp1] LCP: Open event
> [pptp1] LCP: state change Closing --> Stopping
> [#Create] device: OPEN event in state DOWN
> [#Create] this link has no type set
> [#Create] device is now in state DOWN
> [netgraph] device: OPEN event in state DOWN
> [netgraph] this link has no type set
> [netgraph] device is now in state DOWN
> [device] device: OPEN event in state DOWN
> [device] this link has no type set
> [device] device is now in state DOWN
> [pptp1] rec'd proto CCP during terminate phase
> [pptp1] rec'd proto IPCP during terminate phase
> [pptp1] rec'd proto IPCP during terminate phase
> [pptp1] rec'd proto CCP during terminate phase
> [pptp1] LCP: rec'd Terminate Ack #4 link 0 (Stopping)
> [pptp1] LCP: state change Stopping --> Stopped
> [pptp1] LCP: phase shift TERMINATE --> ESTABLISH
> [pptp1] LCP: LayerFinish
> [pptp1] device: CLOSE event in state UP
> pptp0-0: clearing call
> pptp0-0: killing channel
> [pptp1] PPTP call terminated
> [pptp1] IFACE: Close event
> [pptp1] IPCP: Close event
> [pptp1] IPCP: state change Starting --> Initial
> [pptp1] IPCP: LayerFinish
> [pptp1] IFACE: Close event
> pptp0: closing connection with 192.168.250.253:2694
> [pptp1] IFACE: Close event
> [pptp1] device is now in state CLOSING
> [pptp1] bundle: CLOSE event in state OPENED
> [pptp1] closing link "pptp1"...
> [pptp1] closing link "#Create"...
> [pptp1] closing link "netgraph"...
> [pptp1] closing link "device"...
> [pptp1] device: DOWN event in state CLOSING
> [pptp1] device is now in state DOWN
> [#Create] link: CLOSE event
> [#Create] LCP: Close event
> [#Create] LCP: state change Starting --> Initial
> [#Create] LCP: LayerFinish
> [netgraph] link: CLOSE event
> [netgraph] LCP: Close event
> [netgraph] LCP: state change Starting --> Initial
> [netgraph] LCP: LayerFinish
> [device] link: CLOSE event
> [device] LCP: Close event
> [device] LCP: state change Starting --> Initial
> [device] LCP: LayerFinish
> [pptp1] link: CLOSE event
> [pptp1] LCP: Close event
> [pptp1] LCP: state change Stopped --> Closed
> [pptp1] device: DOWN event in state DOWN
> [pptp1] device is now in state DOWN
> [pptp1] link: DOWN event
> [pptp1] LCP: Down event
> [pptp1] LCP: state change Closed --> Initial
> [pptp1] LCP: phase shift ESTABLISH --> DEAD
> [#Create] device: CLOSE event in state DOWN
> [#Create] this link has no type set
> [#Create] device is now in state DOWN
> [netgraph] device: CLOSE event in state DOWN
> [netgraph] this link has no type set
> [netgraph] device is now in state DOWN
> [device] device: CLOSE event in state DOWN
> [device] this link has no type set
> [device] device is now in state DOWN
> pptp0: CID 0x3746 in SetLinkInfo not found
> [pptp1] link: DOWN event
> [pptp1] LCP: Down event
> pptp0: killing connection with 192.168.250.253:2694
>
> --
> Atenciosamente,
> R. Filippus
>
--
Atenciosamente,
R. Filippus
_______________________________________________________________
Para enviar um novo email para a lista: freebsd em fug.com.br
Sair da Lista: http://mail.fug.com.br/mailman/listinfo/freebsd_fug.com.br
Historico: http://www4.fugspbr.org/lista/html/FUG-BR/
Mais detalhes sobre a lista de discussão freebsd