[FUG-BR] Dell 4Gb
Victor Loureiro Lima
victorloureirolima em gmail.com
Quarta Agosto 22 17:15:39 BRT 2007
Cores per package: 2
real memory = 5100273664 (4864 MB)
avail memory = 4119474176 (3928 MB)
2007/8/22, Ciro Cardoso de Meneses <cirocm at sergipenet.com.br>:
> Acho que não, segue o dmseg:
>
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-STABLE #6: Wed Aug 22 01:16:27 BRT 2007
> root at gasparzinho.viaradio.sergipenet.com.br:/usr/src/sys/amd64/compile/GASPAR
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (1596.05-MHz K8-class
> CPU)
> Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,XTPR,<b15>,<b18>>
> AMD Features=0x20100800<SYSCALL,NX,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 2
> real memory = 5100273664 (4864 MB)
> avail memory = 4119474176 (3928 MB)
> ACPI APIC Table: <DELL PE_SC3 >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0: Changing APIC ID to 2
> ioapic1: Changing APIC ID to 3
> ioapic1: WARNING: intbase 32 != expected base 24
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 32-55 on motherboard
> kbd1 at kbdmux0
> acpi0: <DELL PE_SC3> on motherboard
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 2000
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci4: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
> pci5: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
> pci6: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci5
> pci7: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci4
> pci8: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci9: <ACPI PCI bus> on pcib6
> bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xfc5f0000-0xfc5fffff irq
> 16 at device 0.0 on pci9
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge0: Ethernet address: 00:10:18:2c:67:1a
> pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci10: <ACPI PCI bus> on pcib7
> bge1: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xfc3f0000-0xfc3fffff irq
> 16 at device 0.0 on pci10
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge1: Ethernet address: 00:10:18:2c:67:bf
> pcib8: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci1: <ACPI PCI bus> on pcib8
> pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci11: <ACPI PCI bus> on pcib9
> pcib10: <PCI-PCI bridge> at device 7.0 on pci0
> pci12: <PCI bus> on pcib10
> pci0: <base peripheral> at device 8.0 (no driver attached)
> pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib11
> pcib12: <PCI-PCI bridge> at device 0.0 on pci2
> pci3: <PCI bus> on pcib12
> bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
> 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
> miibus2: <MII bus> on bce0
> brgphy2: <BCM5708C 10/100/1000baseTX PHY> on miibus2
> brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bce0: Ethernet address: 00:19:b9:cc:57:f9
> bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
> (0x02090105); Flags( MFW )
> uhci0: <UHCI (generic) USB controller> port 0xdce0-0xdcff irq 21 at device
> 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xdcc0-0xdcdf irq 20 at device
> 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0xdca0-0xdcbf irq 21 at device
> 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0xdc80-0xdc9f irq 20 at device
> 29.3 on pci0
> uhci3: [GIANT-LOCKED]
> usb3: <UHCI (generic) USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900400-0xfc9007ff irq 21
> at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <EHCI (generic) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2
> uhub5: multiple transaction translators
> uhub5: 4 ports with 4 removable, self powered
> pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci13: <ACPI PCI bus> on pcib13
> pci13: <display, VGA> at device 13.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel 63XXESB2 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> atapci1: <Intel 63XXESB2 SATA300 controller> port
> 0xdc78-0xdc7f,0xdc70-0xdc73,0xdc60-0xdc67,0xdc58-0xdc5b,0xdc40-0xdc4f mem
> 0xfc900000-0xfc9003ff irq 23 at device 31.2 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <4 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
> accept, logging limited to 100 packets/entry by default
> acd0: CDROM <GCR-8485B/1.06> at ata0-master UDMA33
> ad4: 238418MB <WDC WD2500JS-75NCB3 10.02E04> at ata2-master SATA150
> ad6: 238418MB <WDC WD2500JS-75NCB3 10.02E04> at ata3-master SATA150
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad4s1a
> bce0: link state changed to UP
> bge0: link state changed to UP
>
>
>
> ----- Original Message -----
> From: "Rafael Stockler" <rafael.stockler at gmail.com>
> To: "Lista Brasileira de Discussão sobre FreeBSD (FUG-BR)"
> <freebsd at fug.com.br>
> Sent: Wednesday, August 22, 2007 2:56 PM
> Subject: Re: [FUG-BR] Dell 4Gb
>
>
> On 8/22/07, Ciro Cardoso de Meneses <cirocm at sergipenet.com.br> wrote:
> >
> > Boa Tarde,
> >
> > Pessoal, tenho um dell 1950 com 4096 Mb de memória, estou usando o kernel
> > amd64 6.2 stable
> > mas ele só reconhece 3982! já li que com o amd64 não é necessário usar o
> > PAE
> > para reconhecer o
> > resto da memória, o que fazer?
>
>
>
> Boa tarde,
>
> Sua placa de vídeo é onboard? Esse restante de memória poderia estar sendo
> absorvida pela placa de video.
>
> []´s
> > Ciro
> >
> > -------------------------
> > Histórico: http://www.fug.com.br/historico/html/freebsd/
> > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
> >
> -------------------------
> Histórico: http://www.fug.com.br/historico/html/freebsd/
> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>
> -------------------------
> Histórico: http://www.fug.com.br/historico/html/freebsd/
> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>
Mais detalhes sobre a lista de discussão freebsd