[FUGSPBR] problema serio

Vinicius (vinis) vinis em netbsd.com.br
Sáb Set 29 20:36:46 BRT 2001


 
Opa,


  Seguinte, minha rede fica num sobe de e desce todos os dias.... olhem o  meu dmesg

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #0: Tue Sep 18 14:37:44 BRT 2001
    vinis em proliant.darktech.org:/usr/src/sys/compile/PROLIANT
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium Pro (199.43-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
  Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 134217728 (131072K bytes)
avail memory = 127537152 (124548K bytes)
Preloaded elf kernel "kernel" at 0xc02fd000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <IBM 82351 PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
sym0: <875> port 0x7000-0x70ff mem 0x40100000-0x40100fff,0x40101000-0x401010ff irq 9 at device 4.0 on pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
pci1: <Cirrus Logic GD5430 SVGA controller> at 9.0
tl0: <Compaq NetFlex-3/P Integrated> port 0x6000-0x600f mem 0x40000000-0x4000000f irq 5 at device 16.0 on pci0
tl0: Ethernet address: 00:80:5f:35:38:52
miibus0: <MII bus> on tl0
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0:  10base2/BNC, 10base5/AUI, 10baseT, 10baseT-FDX, auto
isab0: <Intel 82371SB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf100-0xf10f at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0579 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
IPsec: Initialized Security Association Processing.
acd0: CDROM <HITACHI CDR-7930> at ata0-master using PIO3
Waiting 15 seconds for SCSI devices to settle
sa0 at sym0 bus 0 target 6 lun 0
sa0: <HP C1533A A612> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 16)
da0 at sym0 bus 0 target 12 lun 0
da0: <QUANTUM ATLAS IV 9 WLS 0808> Fixed Direct Access SCSI-3 device 
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)
da1 at sym0 bus 0 target 14 lun 0
da1: <COMPAQ ST32171W 0388> Fixed Direct Access SCSI-2 device 
da1: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C)
Mounting root from ufs:/dev/da0s1a
pid 362 (squid), uid 1001: exited on signal 6
pid 364 (squid), uid 1001: exited on signal 6
pid 366 (squid), uid 1001: exited on signal 6
pid 369 (squid), uid 1001: exited on signal 6
pid 371 (squid), uid 1001: exited on signal 6
cd9660: RockRidge Extension
cd9660: RockRidge Extension
pid 691 (wget), uid 1001: exited on signal 11 (core dumped)
pid 692 (wget), uid 1001: exited on signal 11 (core dumped)
pid 695 (wget), uid 1001: exited on signal 11 (core dumped)
tl0: tx underrun -- increasing tx threshold to 512 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
pid 719 (wget), uid 1001: exited on signal 11 (core dumped)
pid 720 (wget), uid 1001: exited on signal 11 (core dumped)
pid 721 (wget), uid 1001: exited on signal 11 (core dumped)
pid 722 (wget), uid 1001: exited on signal 11 (core dumped)
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: promiscuous mode enabled
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: tx underrun -- increasing tx threshold to 2048 bytes
tl0: promiscuous mode disabled
----
Para sair da lista envie um e-mail para majordomo em fugspbr.org
com as palavras "unsubscribe fugspbr" no corpo da mensagem.



Mais detalhes sobre a lista de discussão freebsd