[FUGSPBR] problema serio

Edson Brandi ebrandi.home em uol.com.br
Dom Set 30 10:02:40 BRT 2001


Vinis, voce esta usando essa maquina para coletar o trafego da sua rede
com tcpdump ou algo do genero ??? Esse tipo de msg eh natural quando voce
esta com um trafego muito intenso, seu sistema nao esta conseguindo
entregar os dados solicitados via rede para a sua placa de rede.

So tem dois jeitos de resolver, aumentando o buffer disponivel para pilha
tcp/ip ou colocando HDs e memorias mais rapidas.

Dos dois ajustes dinamicos que a placa de rede pode fazer, o "using store
and forward mode" eh o mais critico pois ele diminui em muito a
performance da sua rede pois sua placa de rede nao ira transmitir o pacote
enquanto ele nao estiver completamente armazenado na sua area de FIFO.

OK ? Alguma duvida ?

Edson

-----

TX underrun -- increasing TX threshold

The device generated a transmit underrun error while attempting to DMA and
transmit a packet. This happens if the host is not able to DMA the packet
data into the NIC's FIFO fast enough.  The driver will dynamically increase the
transmit start threshold so that more data must be DMAed into the FIFO
before the NIC will start transmitting it onto the wire.

TX underrun -- using store and forward mode

The device continuedn to generate transmit underruns even after all possible transmit
start threshold settings had been tried, so the driver programmed the chip
for store and forward mode.  In this mode, the NIC will not begin
transmission until the entire packet has been transfered into its FIFO
memory.

----

On Sat, 29 Sep 2001, Vinicius wrote:

>
> Opa,
>
>
>   Seguinte, minha rede fica num sobe de e desce todos os dias.... olhem o  meu dmesg
>
> Copyright (c) 1992-2001 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 4.4-STABLE #0: Tue Sep 18 14:37:44 BRT 2001
>     vinis em proliant.darktech.org:/usr/src/sys/compile/PROLIANT
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: Pentium Pro (199.43-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
>   Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
> real memory  = 134217728 (131072K bytes)
> avail memory = 127537152 (124548K bytes)
> Preloaded elf kernel "kernel" at 0xc02fd000.
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <IBM 82351 PCI-PCI bridge> at device 8.0 on pci0
> pci1: <PCI bus> on pcib1
> sym0: <875> port 0x7000-0x70ff mem 0x40100000-0x40100fff,0x40101000-0x401010ff irq 9 at device 4.0 on pci1
> sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
> pci1: <Cirrus Logic GD5430 SVGA controller> at 9.0
> tl0: <Compaq NetFlex-3/P Integrated> port 0x6000-0x600f mem 0x40000000-0x4000000f irq 5 at device 16.0 on pci0
> tl0: Ethernet address: 00:80:5f:35:38:52
> miibus0: <MII bus> on tl0
> tlphy0: <ThunderLAN 10baseT media interface> on miibus0
> tlphy0:  10base2/BNC, 10base5/AUI, 10baseT, 10baseT-FDX, auto
> isab0: <Intel 82371SB PCI to ISA bridge> at device 20.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX3 ATA controller> port 0xf100-0xf10f at device 20.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> eisa0: <EISA bus> on motherboard
> mainboard0: <CPQ0579 (System Board)> on eisa0 slot 0
> orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> IPsec: Initialized Security Association Processing.
> acd0: CDROM <HITACHI CDR-7930> at ata0-master using PIO3
> Waiting 15 seconds for SCSI devices to settle
> sa0 at sym0 bus 0 target 6 lun 0
> sa0: <HP C1533A A612> Removable Sequential Access SCSI-2 device
> sa0: 10.000MB/s transfers (10.000MHz, offset 16)
> da0 at sym0 bus 0 target 12 lun 0
> da0: <QUANTUM ATLAS IV 9 WLS 0808> Fixed Direct Access SCSI-3 device
> da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
> da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)
> da1 at sym0 bus 0 target 14 lun 0
> da1: <COMPAQ ST32171W 0388> Fixed Direct Access SCSI-2 device
> da1: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged Queueing Enabled
> da1: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C)
> Mounting root from ufs:/dev/da0s1a
> pid 362 (squid), uid 1001: exited on signal 6
> pid 364 (squid), uid 1001: exited on signal 6
> pid 366 (squid), uid 1001: exited on signal 6
> pid 369 (squid), uid 1001: exited on signal 6
> pid 371 (squid), uid 1001: exited on signal 6
> cd9660: RockRidge Extension
> cd9660: RockRidge Extension
> pid 691 (wget), uid 1001: exited on signal 11 (core dumped)
> pid 692 (wget), uid 1001: exited on signal 11 (core dumped)
> pid 695 (wget), uid 1001: exited on signal 11 (core dumped)
> tl0: tx underrun -- increasing tx threshold to 512 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> pid 719 (wget), uid 1001: exited on signal 11 (core dumped)
> pid 720 (wget), uid 1001: exited on signal 11 (core dumped)
> pid 721 (wget), uid 1001: exited on signal 11 (core dumped)
> pid 722 (wget), uid 1001: exited on signal 11 (core dumped)
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: promiscuous mode enabled
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: tx underrun -- increasing tx threshold to 2048 bytes
> tl0: promiscuous mode disabled
> ----
> Para sair da lista envie um e-mail para majordomo em fugspbr.org
> com as palavras "unsubscribe fugspbr" no corpo da mensagem.
>

[ ]'s Edson
                                                ,        ,
   Edson Brandi                                /(        )`
   Supervisor de Operacoes - UOL               \ \___   / |
   Fone:   0XX11 96555470                      /- _  `-/  '
           0XX11 32244103                     (/\/ \ \   /\
   ICQ at Work:  32512639                     / /   | `    \
   ICQ at Home: 100503189                     O O   ) /    |
---------------------------------------       `-^--'`<     '
                                             (_.)  _  )   /
Transforme seu PC numa Workstation Unix.      `.___/`    /
 Visite http://www.primeirospassos.org         `-----' /
        http://www.fugspbr.org     <----.     __ / __   \
                                   <----|====O)))==) \) /====
                                   <----'    `--' `.__,' \

----
Para sair da lista envie um e-mail para majordomo em fugspbr.org
com as palavras "unsubscribe fugspbr" no corpo da mensagem.



Mais detalhes sobre a lista de discussão freebsd