[FUGSPBR] Rede Wireless e Banda - Virando OFF TOPIC

Vini vini em veloxmail.com.br
Qua Jul 2 16:55:33 BRT 2003


Oi,

Pelo que pude ver ele parece que ta tentando usar MPPE, tente colocar

disable mppe

Depois nos conta o que deu...

A outra ponta é windows ou FreeBSD?

Até mais
Vini

Jean Everson Martina escreveu:
> bom eu tinha isso muito parecido funcionando num Free. O meu ppp.conf tem a seguinte entrada:
> 
> 
> pppoe:
>         allow users
>         disable chap
>         enable pap
>         allow mode direct
>         set mru 1492
>         set mtu 1492
>         set speed sync
>         accept dns
>         set dns 200.180.124.2 200.180.124.3
>         enable lqr
>         set ifaddr 192.168.2.1 192.168.2.2-192.168.3.254
> 
> os logs comecam assim:
> 
> Jul  2 16:28:11 praiadoporto ppp[30948]: Phase: Using interface: tun3 
> Jul  2 16:28:11 praiadoporto ppp[30948]: Phase: deflink: Created in closed state 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: default: set redial 15 0 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: default: set reconnect 15 0 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: shbants: disable chap 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: shbants: enable pap 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: shbants: set mru 1492 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: shbants: set mtu 1492 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: shbants: set speed sync 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: shbants: accept dns 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: shbants: set dns 200.180.124.2 200.180.124.3 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: shbants: enable lqr 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Command: shbants: set ifaddr 192.168.2.1 192.168.2.2-192.168.3.254 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: IPCP: Selected IP address 192.168.3.91 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Phase: PPP Started (direct mode). 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Phase: bundle: Establish 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Phase: deflink: closed -> opening 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Phase: deflink: Connected! 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Phase: deflink: opening -> carrier 
> Jul  2 16:28:11 praiadoporto ppp[30948]: tun3: Phase: deflink: carrier -> lcp 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: Phase: bundle: Authenticate 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: Phase: deflink: his = none, mine = PAP 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: Phase: Pap Input: REQUEST (shbants) 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: Phase: Pap Output: SUCCESS 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: CCP: FSM: Using "deflink" as a transport 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: CCP: deflink: State change Initial --> Closed 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: CCP: deflink: LayerStart. 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: CCP: MPPE: Not usable without CHAP81 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: CCP: deflink: SendConfigReq(1) state = Closed 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: CCP:  DEFLATE[4] win 15 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: CCP:  PRED1[2]  
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: CCP: deflink: State change Closed --> Req-Sent 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: Phase: deflink: lcp -> open 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: Phase: bundle: Network 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: IPCP: FSM: Using "deflink" as a transport 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: IPCP: deflink: State change Initial --> Closed 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: IPCP: deflink: LayerStart. 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: IPCP: deflink: SendConfigReq(1) state = Closed 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: IPCP:  IPADDR[6] 192.168.2.1 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression 
> Jul  2 16:28:14 praiadoporto ppp[30948]: tun3: IPCP: deflink: State change Closed --> Req-Sent 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: Phase: Pap Input: REQUEST (shbants) 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: Phase: Pap Output: SUCCESS 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: Phase: deflink: Already in NETWORK phase 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: Warning: ff02::%tun3/32: Change route failed: errno: Undefined error: 0 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: CCP: MPPE: Not usable without CHAP81 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: CCP: deflink: SendConfigReq(1) state = Req-Sent 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: CCP:  DEFLATE[4] win 15 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: CCP:  PRED1[2]  
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: IPCP: deflink: SendConfigReq(1) state = Req-Sent 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: IPCP:  IPADDR[6] 192.168.2.1 
> Jul  2 16:28:17 praiadoporto ppp[30948]: tun3: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: Phase: Pap Input: REQUEST (shbants) 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: Phase: Pap Output: SUCCESS 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: Phase: deflink: Already in NETWORK phase 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: Warning: ff02::%tun3/32: Change route failed: errno: Undefined error: 0 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: CCP: MPPE: Not usable without CHAP81 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: CCP: deflink: SendConfigReq(1) state = Req-Sent 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: CCP:  DEFLATE[4] win 15 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: CCP:  PRED1[2]  
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: IPCP: deflink: SendConfigReq(1) state = Req-Sent 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: IPCP:  IPADDR[6] 192.168.2.1 
> Jul  2 16:28:20 praiadoporto ppp[30948]: tun3: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression 
> Jul  2 16:28:23 praiadoporto ppp[30948]: tun3: Phase: Pap Input: REQUEST (shbants) 
> Jul  2 16:28:23 praiadoporto ppp[30948]: tun3: Phase: Pap Output: SUCCESS 
> Jul  2 16:28:23 praiadoporto ppp[30948]: tun3: Phase: deflink: Already in NETWORK phase 
> Jul  2 16:28:23 praiadoporto ppp[30948]: tun3: Warning: ff02::%tun3/32: Change route failed: errno: Undefined error: 0 
> Jul  2 16:28:23 praiadoporto ppp[30948]: tun3: CCP: MPPE: Not usable without CHAP81 
> Jul  2 16:28:23 praiadoporto ppp[30948]: tun3: CCP: deflink: SendConfigReq(1) state = Req-Sent 
> Jul  2 16:28:23 praiadoporto ppp[30948]: tun3: CCP:  DEFLATE[4] win 15 
> Jul  2 16:28:23 praiadoporto ppp[30948]: tun3: CCP:  PRED1[2]  
> Jul  2 16:28:23 praiadoporto ppp[30948]: tun3: IPCP: deflink: SendConfigReq(1) state = Req-Sent 
> 
> e seguem até cair.
> 
> o pppoe server ta rodando com os seguites parametro:
> 
> /usr/sbin/pppoe -s -v -i xl1 -p pppoe
> 
> 
> Jean
> 
> 
> On Wed, 02 Jul 2003 11:04:35 -0300
> Vini <vini em veloxmail.com.br> wrote:
> 
> 
>>Oi,
>>
>>Da pra vc colar os erros dos logs do ppp?
>>
>>Até mais
>>Vini
>>
>>Jean Everson Martina escreveu:
>>
>>>agora q foi levantado o assunto, eu to com um server pppoe rodando em OpenBSD, que ta me dando uma certa dor de cabe__a com cliente windows9x. No 2000 funciona ok, no 9X ele da uns paus de LCP. Alguem tem uma entrada de ppp.conf que funcione no windows9x?
>>>
>>>
>>>Jean
>>
> 
> _______________________________________________________________
> Sair da Lista: http://www2.fugspbr.org/mailman/listinfo/fugspbr
> Historico: http://www4.fugspbr.org/lista/html/FUG-BR/
> 
> 


_______________________________________________________________
Sair da Lista: http://www2.fugspbr.org/mailman/listinfo/fugspbr
Historico: http://www4.fugspbr.org/lista/html/FUG-BR/



Mais detalhes sobre a lista de discussão freebsd